TM 9-2350-261-20-2
R E P L A C E T R A N S M I S S I O N H I G H O I L T E M P E R A T U R E S W I T C H
INITIAL SETUP
Tools:
Personnel Required:
General Mechanics Tool Kit (Item 30, App D)
Unit Mechanic
Socket Wrench Set (Item 89, App D)
Torque Wrench (Item 95, App D)
References:
Materials/Parts:
Sealing compound (Item 50, App C)
see your -10
Equipment Conditions:
Engine stopped/shutdom (see your -10)
REMOVE
1. Disconnect circuit 327 lead (1) from
transmission high oil temperature switch (2).
2. Remove switch (2) from tee (3).
CLEAN, INSPECT, AND REPAIR
3. Check threads on switch. Remove burrs.
Replace switch that has stripped threads.
INSTALL
4.
5.
6.
Coat threads of switch (2) with sealing
compound.
Install switch (2) in tee (3). Tighten switch
to 240-264 lb-in (27–34 N•m) torque. Use
torque wrench.
Connect circuit 327 lead (1) to switch (2).
FOLLOW-THROUGH STEPS
W A R N I NG
Loose clothing is dangerous
around moving belts and
pulleys. You could get bad-
ly hurt if your clothes get
caught in moving parts.
1. Start engine to check for oil leaks at
transmission high oil temperature switch.
Stop/shutdown engine (see your -10).
2. Close power plant front access door and raise
trim vane (see your -10).
END OF TASK
15-6
