TM 9-2350-261-20-2
1 1 . Disconnect circuit 641E and 641F leads
(1 and 2) from suspension lockout solenoid
(3) (M741A1 only).
1
2 .Remove 11 screws (4), 8 clamps (5), 8 nuts
(6), 3 straps (7), and power plant wiring
harness (8) from power plant.
INSTALL
13. Install power plant wiring harness (8) on
power plant. Secure with 3 straps (7), 8
nuts (6), 8 clamps (5), and 11 screws (4).
14. Connect circuits 641F and 641E leads
(1 and 2) to suspension lockout solenoid (3).
15-10
Change 4