TM 9-2350-261-20-2
7. Attach a 12 foot (3.7 meter) rope (1) to the
battery end of circuit 48 lead (2). Pull har-
ness through the transverse beam from the
receptacle end.
8. Do not pull rope out of transverse beam,
Leave some rope hanging out of beam at
right side of earner. Untie rope from har-
ness (2).
INSTALL
9. Tie rope (1), retained in transverse beam, to
circuit 48 harness (2) at battery end.
10. Pull rope (1) and harness (2) through the
transverse beam until harness can be
grasped at the right side of carrier.
11. Pull harness (2) to the battery box on right
side of earner.
GO TO NEXT PAGE
13-29
