TM 9-2350-261-20-2
REPAIR BATTERY DRAWER (M106A2, M125A2, AND M1064 ONLY)
DESCRIPTION
This task covers:
Remove (page 13-24).
Clean, Inspect, and Repair (page 13-25).
Install (page 13-25).
INITIAL SETUP
Tools:
General Mechanics Tool Kit (Item 30, App D)
Materials/Parts:
Epoxy coating kit (Item 15, App C)
Grease (Item 18, App C)
Sodium bicarbonate (Item 55, App C)
Self-locking nut (18)
Self-locking nut (8)
Self-locking nut (4)
Self-locking nut (2)
Self-locking nut
Personnel Required:
Unit Mechanic
References:
See your -10
Equipment Conditions:
Engine stopped/shutdown (see your -10)
Carrier blocked (see your -10)
Battery leads removed (page 13-10)
Batteries and retainers removed (page 13-18)
REMOVE
1.
2.
3.
4.
Lower the left crew seat backrest, turn
handle (1) and pull drawer (2) out.
Remove eight locknuts (3), washers (4),
screws (5), and battery drawer (6) from two
angles (7) . Discard locknuts.
Extend two slide assemblies (8) to stops. Re-
move eight locknuts (9), washers (10), screws
(11), and two angles (7) from slide
assemblies. Discard locknuts.
Extend two slide assemblies (8) to stops. Re-
move 10 locknuts (12), washers (13), screws
(14), and slide assemblies from hull mounts.
Discard locknuts.
13-24
Change 2