T M
19.
20.
9-2350-261-20-2
Coat all bearing surfaces of two slide assem- 21.
blies (1) with grease.
Place two slide assemblies (1) on hull
mounts. Extend slide stops. Secure with 10
screws (2), washers (3), and new lock-
22.
nuts (4).
23.
Extend two slide assemblies (1) to stops.
Align two angles (5) with holes in slides.
Secure with eight screws (6), washers (7),
and new locknuts (8).
Align battery drawer (9) with holes in two
angles (5). Secure with eight screws (10),
washers (11), and new locknuts (12).
Turn handle (13) on drawer (9) to secure
and raise left crew seat backrest.
FOLLOW-THROUGH STEPS
1. Install batteries and retainers (page 13–18).
3. Raise and lock ramp (see your -10).
2. Install battery leads (page 13-10).
4. Stop engine (see your –10).
END OF TASK
13-26
Change 2
