INSTALL
CAUTION
Battery cells can be damaged if battery is
hooked up incorrectly. Make sure battery
is hooked up correctly.
8.
9.
Install four battery terminals (1 and 2) in
battery box (3). Secure with four screws (4)
and nuts (5).
Install four circuit leads (6, 7, 8, and 9) as
follows:
a.
b.
c.
d.
Install two new grommets (10 and 11) in
battery box (3).
Route circuit 6 lead (6), circuit 31 lead
(7), and circuit 7 lead (8) through
three-hole grommet (10) into battery
box (3).
Route circuit 48B lead (9) through
grommet (11) into battery box (3).
Install circuit 48B lead (9), circuit 31
lead (7), and circuit 6 lead (6) on battery
positive terminal (1). Secure with screw
(12) and nut (13).
e.
f.
TM 9-2350-261-20-2
Install circuit 7 lead (8) on battery
negative terminal (2). Secure with screw
(12) and nut (13).
Install circuit 7 lead (8) on hull mount.
Secure with two washers (14), screw
(15), and nut (16).
10. Install jumper lead (17) as follows:
a.
b.
Install jumper lead (17) on battery
negative terminal (2). Secure with screw
(12) and nut (13).
Install jumper lead (17) on battery
positive terminal (1). Secure with screw
(12) and nut (13).
11. Coat tops of four battery terminals
(1 and 2) with grease.
Change 3
13-6.5
