TM 9-2350-261-20-2
REMOVE/INSTALL BATTERY ACCESS COVER (M577A2 ONLY)
INITIAL SETUP
Personnel Required:
References:
Unit Mechanic
See your -10
Material/Parts:
Equipment Conditions:
Nonmetallic bumper (5)
Engine stopped/shutdown (see your -10)
REMOVE
1.
2.
3.
Raise right forward table (1). Secure with
support rod (2) and remove three wing
nuts (3)0
Lift and slide cover (4) from battery box.
Remove five nonmetallic bumpers (5) from
cover. Discard bumpers.
INSTALL
4.
5.
6.
Install five new nonmetallic bumpers (5) in
battery box cover (4).
Slide cover (4) onto battery box.
three wing nuts (3).
Lower support rod (2) and right
Secure with
forward
table (1).
END OF TASK
13-6
- - - - -