TM 9-2350-261-20-2
4.
5.
6.
7.
Disconnect circuit 451 lead (1) from rear bilge
8.
pump (2).
Disconnect circuits 21, 22. 23. and 24 leads
!3.
(3, 4, 5, and 6) from trailer wiring har-
ness (7).
10,
Remove screw (8), two lockwashers (9), clamp
(10), wiring harness (11), and circuit 90
ground lead ( 12) from weldnut (13). Discard
lockwashers.
11,
Remove two screws ( 14), nuts (15), and
clamp (16) from floor transverse beam (17).
Remove screw (18), nut (19), and clamp
( 16) from wiring harness (20).
Remove three cradle clips (21) and wiring
harness (20) from three cradles (22).
Remove two screws (23),
and guard (25) from two
Discard lockwashers.
Remove two screws (27),
(29), and wiring harness
guard (25).
lockwashers (24),
weldnuts (26).
nuts (28), clamps
( 20) from
GO TO NEXT PAGE
12-107
