69.
70.
71.
72.
Remove two nuts (1), mounts (2 and 3),
73.
flat washers (4), and screws (5) that secure
instrument panel (6) to two struts (7).
74.
Support panel (6). Remove two screws (8),
flat washers (9), one lockwasher (10), and
ground lead (11), from two mounts (12) and
75.
upper support (13 ). Discard lockwasher.
Support panel (6) on two struts (7) to gain
76.
access to rear of panel.
Disconnect circuit 28 lead (14) from fuel
gage.
Disconnect circuit 451B lead (15) from rear
bilge pump ON indicator light.
Disconnect circuit 38 lead (16) from
instrument panel wiring harness,
Disconnect circuits 450, 450B, and 451A
(17, 18, and 19) from bilge pump switch.
Disconnect circuits 21, 22, 23, and 24 leads
(20, 21, 22, and 23) from front main
wiring harness.
12-92
TM 9-2350-261-20-2
