TM 9-2350-261-20-18. Disconnect fuel supply hose (1) from secondary fuelfilter (2).9. Connect red stripe pressure transducer (3) to sec-ondary fuel filter outlet.10. Connect transducer cable W4P1 (4) to J3 onVTM (5).11. Connect transducer cable W4P2 (6) to red stripepressure transducer (3).12. Set test select switches to 49.13. Press and hold test until CAL appears on display.14. Is offset value within range of -4 to + 4?1. Turn on fuel and accessory switches.2. Press and release test button.3. Crank engine and read display.4. Is fuel pressure greater than 4 psi?1. Go to offset fault isolation(TM 9-4910-571-12&P).2. Verify no faults found.3-272Change 1
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
