TM 9-2350-261-20-1
1. Is failing launcher on right side of carrier?
1. Install jumper wire between circuit 7 (1) and 799
jacks (2).
2. Remove harness plug (3) from harness jack (4) at
earner bulkhead.
3. Measure resistance between harness plug (3) pins
A (5) and B (6).
4. Does multimeter read 0 ohms?
GO TO
3-200
1. Replace harness
(page 27-3).
2. Verify no faults found.
I
GO TO NEXT PAGE
p a g e
3-197