SUSPENSION LOCKOUT DOES NOT HOLD (M741A1 ONLY) CONT.

SUSPENSION LOCKOUT DOES NOT HOLD (M741A1 ONLY)

SUSPENSION LOCKOUT DOES NOT RELEASE (M741A1 ONLY)

TM-9-2350-261-20-1 Carrier Personnel Full Tracked Armored M113A2 2350-01-068-4077 Carrier Command Post Light Tracked M577A2 2350-01-068-4089 Manual
Page Navigation
372

TM 9-2350-261-20-1 2. 3. 4. { - Disconnect plug 509 (1) from pressure switch M9395/31 (2). Unblock earner (see your -10). Place a wood block in front of earner and drive carrier over wood block slowly. Have helper observe. Does each road arm remain in fixed position when rolling over block? 1. Block earner (see your -10). 2. Connect plug 509 to pressure switch M9395/31. 3. Go to: Suspension lockout does not extend (page 3-289). 4. Verify no faults found. 1. Block carrier (see your -10). 2. Replace lockout cylinder which does not hold road arm in fixed position (page 28-72). 3. connect plug 509 to pres- sure switch M9395/31. 4. Verify no faults found. 3-193 `1.

Privacy Statement
Press Release
Contact