TM 9-2350-261-20-1
1. Turn MASTER SWITCH to OFF.
2. Remove eight nuts (1), washers (2), and screws (3)
from master switch panel (4) and distribution box
(5). Pull panel away from distribution box.
3. Remove circuit 37B plug (6) from circuit breaker
jack (7).
4. Turn MASTER SWITCH to ON.
5. Measure voltage between circuit breaker jack (7)
and ground.
6. Does multimeter read less than 17 volts?
1. Remove circuit 10 plug (1) from circuit breaker jack
(2).
2. Measure voltage between circuit 10 plug (1) and
ground.
3. Does multimeter read less than 17 volts?
1. Turn MASTER SWITCH
to OFF.
2. Repair rear main wiring
harness circuit 37B
(page 14–3).
3. Verify no faults found.
1. Turn MASTER SWITCH
to OFF.
2. Replace circuit breaker
(page 17-11).
3. Verify no faults found.
3-126
