TM 9-2350-261-20-1
1. Stop engine (see your -10).
2. Remove engine harness plug C8 (1) from generator jack
(2) and engine harness plug C3 (3) from front main
harness bulkhead jack (4).
3. Inspect engine harness plugs C8 (l), C3 (3) and
generator jack (2) and bulkhead jack (4) for corrosion
and damage. Use mirror.
4. Are plugs and jacks clean and in good condition?
1. Measure resistance between engine harness plug
C8 (1) and plug C3 (2), sockets D (3) to pins B (4), C (5)
to C (6), B (7) to D (8), and E (9) to E (10).
2. Does multimeter read 0 ohms each time?
1. Repair/replace engine
harness and/or generator
(page 14-3 or 9-31).
2. Verify no faults found.
1. Repair/replace engine
harness (page 14-3).
2. Verily no faults found.
I
3-56 Change 4