TM 9-2350-261-10
4.
5.
6.
Service front bilge pump. Use
flashlight.
Disconnect lead from bilge pump.
Remove two screws, lockwashers,
and flat washers securing bilge
pump screen to weld nuts,
Remove screen. Use cross tip
screwdriver.
7. Remove mud and debris from
bilge pump and screen. If bilge
pump needs additional cleaning,
notify unit maintenance,
8. Clean vent hole. Use a wire and
run it back and forth in vent
9. Clean front bilge pump outlet line
sight glass as needed. If sight
glass must be removed to get it
clean, notify unit maintenance.
hole a few times.
GO TO NEXT PAGE
3-39
