TM 9-2350-247-34REPLACE ENGINE THERMOSTAT (M548A3) — Continued 0013 007. Install right engine exhaust pipe (18). Secure with two clamps (19). Tighten clamp nuts to 100-110 lb-in (11-12 N•m)torque.FOLLOW-THROUGH STEPS1. Close thermostat housing drain valve (see your -20).2. Install hull bottom access cover (see your -10).3. Fill cooling system (see your -20).4. Start engine (see your -10) and run until operating temperature of 160-230F (71-110C) is reached. Check for leaks.5. Stop engine (see your -10). Check coolant level.6. Add coolant as needed to bring level to bottom of filler neck (see your -20).7. Install top access cover (see your -10).END OF TASK0013 00-4
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business