TM 9-2350-247-20-3
REPLACE DOOR WINDOWS Continued
0387 00
REMOVAL
NOTE
Left and right door windows are removed the same way. Normally, complete disassembly of cab
door window is not needed. Remove only those parts that inspection shows are faulty.
1.
Remove two screws (1) and washers (2). Remove window frame (3) from cab door.
2.
Remove handle retainer pin (4) that secures spring end of sliding window handle (5). Remove handle and handle spring
(6) from sliding window bottom channel (7). Remove spring retainer from bottom channel.
3.
Slide glass (8) to front. Remove four screws (9) that secure rear glass run channel (10). Return glass to rear position.
Remove one screw and channel.
4.
Remove four screws (11) that secure front glass run channel (12). Remove channel.
5.
Remove two screws (1) and lock nuts (2) that secure two fixed window retainers (3) to window frame (4). Remove
retainers. Discard lock nuts.
0387 00-2