TM 9-2350-247-20-3
REPLACE DOOR WINDOWS — Continued
0387 00
INSTALLATION
1.
Clean grooves in window frame (1) and back of window seal (2). Apply a light coat of adhesive to mating surfaces.
Install seal.
2.
Clean groove in window frame (1). Install window-to-door seal (3) and window-to-door seal (4).
3.
Clean channel (5), channel (6), and channel (7) and groove in window frame (1). Apply a light coat of adhesive to
mating surfaces. Install channels in window frame.
4.
Clean window (8). Apply a strip of rubber adhesive tape (9) centered lengthwise on bottom edge of glass. Trim tape
ends. Install sliding window bottom channel (10) on glass.
5.
Clean window glass (8). Install window channel (11).
6.
Clean rear edge of window glass (8) and inside weatherstrip channel (12) surfaces. Apply a light coat of adhesive to
mating surfaces. Install channel on rear edge of glass.
7.
Slide window glass (8) with channel (11) and weatherstrip channel (12) as a unit forward into groove in window
frame (1).
0387 00-4
