TM 9-2350-247-20-3
REPLACE CAB DOOR, HANDLES, AND LINKAGE — Continued
0386 00
ASSEMBLY
1.
Place door pad (1) on door (2). Secure with two pad screws (3) and washers (4).
2.
Assemble door hinge straps on carriers with two hinge lugs.
a.
Place two hinge straps (5), locking plates (6), and front end of linkage strap (7) on door (2). Secure with four hinge
strap screws (8) and new lock washers (9).
3.
Assemble door hinge straps on carriers with a single hinge lug.
a.
Place two hinge lugs (10) in two hinge straps (11). Secure with two hinge pins (12), shim washers (13), lug
washers (14), and new cotter pin (15).
b.
Place two hinge straps (11), locking plates (16), and front end of linkage strap (7) on door (2). Secure with four
hinge strap screws (17) and new lock washers (18).
4.
Assemble door handle and latch.
a.
Press new latch spring roll pin (19) into door latch (20) so pin extends 1/2 inch (13 mm) out of latch. Assemble
latch spring (21) and door latch (20) into latch housing (22).
b.
Place latch housing (22), top bracket (23), bottom bracket (24), and lock bracket (25) on door (2). Secure with six
bracket mounting screws (26), new lock nuts (27), and two washers (28).
c.
Attach strap (29) to strap loop (30). Place loop on door (2). Secure with two nuts (31).
d.
Place door handle (32) on top bracket (23) and bottom bracket (24). Secure with outside handle pin (33) and new
cotter pin (34).
e.
Engage rear end of linkage strap link (35) with door latch (20). Press new latch-to-chain linkage spring roll pin (36)
through linkage and latch so spring pin is centered in latch.
0386 00-5
