TM 9-2350-247-20-3
REPLACE CAB DOOR, HANDLES, AND LINKAGE — Continued
0386 00
DISASSEMBLY
1.
Disassemble door handle and latch:
a.
Remove latch-to-chain linkage spring roll pin (1) that secures linkage strap link (2) to door latch (3). Disengage
link from latch. Discard spring roll pin.
b.
Remove cotter pin (4), outside handle pin (5), and door handle (6). Discard cotter pin.
c.
Remove two nuts (7) that secure strap loop (8) to door (9). Remove loop and strap (10).
d.
Remove six bracket mounting screws (11), lock nuts (12), and two washers (13) that secure top bracket (14),
bottom bracket (15), lock bracket (16), and latch housing (17) to door (9). Remove brackets and housing. Discard
lock nuts.
e.
Separate door latch (3) and spring (18) from latch housing (17). Remove latch spring roll pin (19) from latch.
Discard spring roll pin.
f.
Remove two catch screws (20) and key washers (21) that secure catch (22) and backup plate (23) to hull. Remove
catch, catch shim(s) (24), and backup plate. Discard key washers.
0386 00-3
