REPLACE VEHICLE COMPARTMENT HEATER ASSEMBLY AND MOUNTING BRACKETS (M548A3) Continued

REPLACE VEHICLE COMPARTMENT HEATER ASSEMBLY AND MOUNTING BRACKETS (M548A3) Continued - TM-9-2350-247-20-3_240

SERVICE VEHICLE COMPARTMENT HEATER FUEL PUMP

TM-9-2350-247-20-3 Carrier Cargo Tracked 6 Ton M548A12350010969356 (EIC: AEU) M548A3 2350013696081 (EIC: AE9) Manual
Page Navigation
189

TM 9-2350-247-20-3 REPLACE VEHICLE COMPARTMENT HEATER ASSEMBLY AND MOUNTING BRACKETS (M548A3) — Continued 0428 00 NOTE Do Step 11 only if replacing fuel filter. 11. Install fuel filter (2) on bracket (3) with two screws (1), new lock washers (5), washers (4), and nuts (6) 12. Install fuel filter (2) with bracket (3) on heater and tighten two clamp halves. 13. Install heater fuel hose (2) on fuel filter elbow (1). 14. Connect fuel pump fuel hose (4) to fuel filter elbow (3). FOLLOW-THROUGH STEPS 1. Connect both battery negative leads (WP 0292 00). 2. Check vehicle compartment heater for proper operation (see your -10). 3. Install front access cover (WP 0391 00). END OF TASK 0428 00-9/10 blank

Privacy Statement
Press Release
Contact