REPLACE VEHICLE COMPARTMENT HEATER ASSEMBLY AND MOUNTING BRACKETS (M548A3) Continued

REPLACE VEHICLE COMPARTMENT HEATER ASSEMBLY AND MOUNTING BRACKETS (M548A3) Continued - TM-9-2350-247-20-3_239

REPLACE VEHICLE COMPARTMENT HEATER ASSEMBLY AND MOUNTING BRACKETS (M548A3) Continued - TM-9-2350-247-20-3_241

TM-9-2350-247-20-3 Carrier Cargo Tracked 6 Ton M548A12350010969356 (EIC: AEU) M548A3 2350013696081 (EIC: AE9) Manual
Page Navigation
188

TM 9-2350-247-20-3 REPLACE VEHICLE COMPARTMENT HEATER ASSEMBLY AND MOUNTING BRACKETS (M548A3) — Continued 0428 00 6. Place two clamps (13) on exhaust duct (14). Install exhaust duct on heater (4) and pipe (1). Do not tighten clamps. 7. Place clamp (10) on air inlet duct (11). 8. Have helper support and rotate heater (4). Install air inlet duct (11) on heater air inlet (12). Secure heater air inlet duct to bulkhead with two washers (8), new lock washers (9), and screws (7). 9. Have helper support heater (4). Tighten seven clamp halves (3), two clamps (13), and clamp (10). 10. Connect wiring harness (6) to heater receptacle (5). 0428 00-8

Privacy Statement
Press Release
Contact