TM 9-2350-247-20-3
REPLACE VEHICLE COMPARTMENT HEATER ASSEMBLY AND MOUNTING BRACKETS
(M548A3) Continued
0428 00
INSTALLATION
NOTE
Do Step 1 and Step 2 only if clamps or mounting brackets were removed for replacement.
1.
Install two mounting brackets (7), five new lock washers (9), and four screws (8) on bulkhead.
2.
Install four clamp halves (4) on two mounting brackets (7).
3.
Install plenum sleeve (5) and four clamp halves (4) on heater plenum (6). Do not tighten clamps.
4.
Place heater (1) in plenum sleeve (5) and four clamp halves (4). Have helper assist.
0428 00-6