TM 9-2350-247-20-2
REPLACE AUXILIARY POWER (SLAVE) RECEPTACLE -- Continued
0303 00
INSTALLATION
NOTE
If the Bendix receptacle is bad, replace it with a NATO auxiliary power receptacle. You will
need to order the retaining plate and attaching hardware shown in TM 9-2350-247-24P.
NOTE
The NATO power receptacle comes with an insulator and gasket. Discard the insulator. The
insulator is not required.
NOTE
Perform Step 1 if the NATO auxiliary power receptacle is installed directly behind the driver's
seat bulkhead (alternate installation). Perform Steps 2 - 3 if the NATO auxiliary power
receptacle is mounted on an adapter plate that is installed on the driver's seat bulkhead.
Make sure protective cap retaining cord is attached to receptacle lower mount screw.
Change 1
