TM 9-2350-247-20-2
REPLACE AUXILIARY POWER (SLAVE) RECEPTACLE -- Continued
0303 00
4.
Remove screw (6), lock washer (7), and circuit 50 lead (9) from positive post (5) of auxiliary power receptacle (4).
Discard lock washer.
5.
Remove screw (11), lock washer (12), and ground lead (10) from negative post (18) of auxiliary power receptacle
(4). Discard lock washer.
NOTE
Perform Step 6 if the NATO auxiliary power receptacle is installed directly to the driver's seat
bulkhead (alternate installation). Perform Steps 7 - 8 if the NATO auxiliary power receptacle is
mounted to an adapter plate that is installed on the driver's seat bulkhead.
Remove four screws (1), washers (3), lock nuts (19), auxiliary power receptacle (4), and gasket (17) from bulkhead
6.
(8). Discard lock nuts and gasket.
Remove four screws (1), lock washers (2), washers (3), auxiliary power receptacle (4), and gasket (17) from retaining
7.
plate (14). Discard lock washers and gasket.
Remove four screws (16), washers (15), lock nuts (13), and retaining plate (14) from bulkhead (8). Discard lock nuts.
8.
0303 00-2
Change 1
