TM 9-2350-247-20-2
REPLACE TRANSMISSION OIL HIGH TEMPERATURE THERMOSTATIC
SWITCH (M548A1)
THIS WORK PACKAGE COVERS:
Removal (page 0286 00-1).
Installation (page 0286 00-1).
INITIAL SETUP:
Maintenance Level
References
Unit
See your -10
Tools and Special Tools
Equipment Condition
General Mechanic's Tool Kit (WP 0541 00, Item 57)
Socket Wrench Set (WP 0541 00, Item 64)
Engine stopped (see your -10)
Torque Wrench (WP 0541 00, Item 70)
Carrier blocked (see your -10)
Personnel Required
Center seat raised (see your -10)
Unit Mechanic
Hull bottom access cover removed (WP 0383 00)
REMOVAL
1.
Disconnect circuit 327 lead (1) from thermostatic switch (2).
2.
Remove thermostatic switch (2) from oil cooler tee (3).
INSTALLATION
1.
Install thermostatic switch (2) in oil cooler tee (3).
2.
Tighten thermostatic switch (2) to 20-25 lb-ft (27-34 Nm) torque.
3.
Connect circuit 327 lead (1) to thermostatic switch (2).
FOLLOW-THROUGH STEPS
1.
Install hull bottom access cover (WP 0383 00).
2.
Lower center seat (see your -10).
END OF TASK
