TM 9-2350-247-20-2
REPLACE BILGE PUMP CIRCUIT BREAKER -- Continued
0268 00
INSTALLATION
1.
Install circuit breaker (3) on bulkhead with two screws (4) and new lock nuts (5).
2.
Connect circuit 450C (2) and 450B (1) to circuit breaker (3).
FOLLOW-THROUGH STEPS
1.
Install left front battery (WP 0290 00) or (WP 0293 00).
2.
Connect battery negative lead(s) (WP 0292 00).
3.
Lower center seat (see your -10).
4.
Lower driver's seat (see your -10).
END OF TASK
