TM 9-2350-247-20-2
REPLACE STARTER (M548A1) -- Continued
0253 00
REMOVAL
1.
Remove nut (1), lock washer (2), and two ground leads (3) from terminal on starter (4). Discard lock washer.
2.
Remove nut (5), lock washer (6), and circuit 6 lead (7) from terminal on starter solenoid (8). Discard lock washer.
3.
Remove nut (9) (screw on Prestolite), lock washer (10) (Delco and Leece Neville only) and circuit 74A lead (11) from
terminal on solenoid (8). Discard lock washer.
WARNING
Avoid injury. Get an assistant to help you lift the starter or use a hoist. Starter weighs about 75
lb (34 kg).
4.
Remove three bolts (12), lock washers (13), and starter (4) with solenoid (8) and gasket (14) (if installed) from engine
(15). Discard lock washers. Have helper assist.
