TM 9-2350-247-20-2
REPLACE GENERATOR (M548A3) -- Continued
0246 00
REMOVAL
1.
Disconnect wiring harness (1) from generator (2).
2.
Remove screw (3), washer (4), spacer (5), and two washers (6) securing turnbuckle (7) to generator (2).
3.
Remove nut (8), lock washer (9), and ground lead (10) from generator (2) case. Discard lock washer.
4.
Remove two lock nuts (11), screws (12), and three washers (13) securing generator (2) to mount (14). Discard lock nuts.
5.
Remove generator (2) from mount (14). Have helper assist.
6.
If replacement generator is to be installed, remove lock nut (15), washer (16), pulley (17), and key (18) from generator
(2). Discard lock nut.
