TM 9-2350-247-20-2
REPLACE THROTTLE PEDAL CONTROL (M548A3) -- Continued
0201 00
7.
Install link pin (1) in throttle pedal (2). Secure with washer (3) and new cotter pin (4).
8.
Install hand throttle control cable (5) through link pin (1) and into retainer collar (6). Secure hand throttle control cable
(5) in retainer collar (6) with setscrew (7).
FOLLOW-THROUGH STEPS
1.
Connect both battery negative leads (WP 0292 00).
2.
Adjust hand throttle (WP 0193 00).
3.
Start engine. Check throttle pedal control and detent for proper operation (see your -10).
4.
Install throttle floor plate (WP 0395 00)
5.
Install left center floor plate (WP 0395 00).
END OF TASK
0201 00-4
