TM 9-2350-247-20-2
REPLACE AIR BOX HEATER HARNESS AND IGNITER CABLE (M548A1) -- Continued
0182 00
INSTALLATION
1.
Connect igniter cable (12) to air box heater (11) and ignition coil (6).
2.
Secure three leads (10) to air box heater (11) with screw (8) and washer (9).
3.
Connect wiring harness (5) to solenoid valve (7) and ignition coil (6).
4.
Connect two leads (3) to air pump (4) with two nuts (1) and washers (2).
FOLLOW-THROUGH STEPS
1.
Lower center seat (see your -10).
2.
Connect battery negative lead(s) (WP 0292 00).
END OF TASK
