TM 9-2350-247-20-2
REPLACE AIR BOX HEATER HARNESS AND IGNITER CABLE (M548A1)
THIS WORK PACKAGE COVERS:
INITIAL SETUP:
Maintenance Level
References
Unit
See your -10
Tools and Special Tools
Equipment Condition
General Mechanic's Tool Kit (WP 0541 00, Item 57)
Engine stopped (see your -10)
Carrier blocked (see your -10)
Personnel Required
Unit Mechanic
Center seat raised (see your -10)
REMOVAL
1.
Remove two nuts (1) and washers (2) that secure two leads (3) on air pump (4). Remove leads.
2.
Disconnect wiring harness (5) from ignition coil (6) and solenoid valve (7).
3.
Remove screw (8), washer (9), and three leads (10) from air box heater (11).
4.
Disconnect igniter cable (12) from ignition coil (6) and air box heater (11).