TM 9-2350-247-20-1
REPLACE ENGINE OIL FILTER ELEMENT AND COVER (M548A3) — Continued
0144 00
INSTALLATION
1.
Clean oil filter housing (1) with cleaning compound.
2.
Install bolt (2) and new gasket (3) in oil filter housing (1).
3.
Install spring (4), new preformed packing (5), spacer (6), and packing retainer (7) on bolt (2).
4.
Install new oil filter element (8), new gasket (9), and nut (10) in oil filter housing (4).
5.
Install oil filter housing (1) with new oil filter element (8) on filter head (11).
6.
Install drain plug (12) in oil filter housing (1).
FOLLOW-THROUGH STEPS
1.
Connect both battery negative leads (WP 0292 00).
2.
Add oil if needed (WP 0128 00).
3.
Lower center seat (see your -10).
END OF TASK
0144 00-3/4 blank
