TM 9-2350-247-20-1
REPLACE ENGINE OIL FILTER ELEMENT AND PARTS (M548A1) — Continued
0143 00
INSTALLATION
NOTE
If only oil filter element is being replaced, do Step 1, Step 4, Step 5, Step 6, and Step 7, and
follow-through Steps 1 - 3.
1.
Apply a thin coat of engine oil on new gasket (1). Install gasket in filter head (2).
2.
Install new gasket (3) on oil filter housing (4). Install retaining bolt (5) in housing.
3.
Install washer (6), spring (7), new preformed packing (8), and retainer (9) on retaining bolt (5). Secure with nut (10).
4.
Place new oil filter element (11) very carefully over retaining bolt (5) in housing (4).
5.
Install oil filter housing (4) with new oil filter element (11) on filter head (2).
6.
Install drain plug (12) in oil filter housing (4).
7.
Tighten retaining bolt (5) to 50-60 lb-ft (68-81 N•m) torque.
8.
Clean external threads of plug (14) and bushing (13) with cleaning compound.
9.
Apply a thin coat of sealing compound and sealing compound primer to cleaned external threads of plug (14) and
bushing (13).
10. If removed, install plug (14) in filter head (2).
11. Install bushing (13) in filter head (2).
12. Install valve (15) in bushing (13) and filter head (2).
0143 00-3
