TM 9-2350-247-20-1
REPLACE ENGINE OIL FILTER ASSEMBLY (M548A3) — Continued
0146 00
REMOVAL
1.
Place a clean suitable container of at least 1 quart (1 liter) capacity under oil filter assembly (1).
NOTE
Dispose of engine oil in accordance with Standard Operating Procedures.
2.
Remove drain plug (2) from oil filter assembly (1). And allow engine oil to drain from filter.
3.
Disconnect inlet hose (3) from elbow (4).
4.
Disconnect outlet hose (5) from elbow (6).
5.
Remove elbows (4 and 6) from oil filter assembly (1).
6.
Remove AOAP sampling valve (7) and bushing (8) from oil filter assembly (1).
7.
Remove four screws (9), lock nuts (10), eight washers (11), and oil filter assembly (1) from bracket (12). Discard
lock nuts.
0146 00-2
