TM 9-2350-247-20-1
REPLACE ENGINE OIL FILTER ELEMENT AND COVER (M548A3) — Continued
0144 00
REMOVAL
1.
Place clean container of at least 1 quart (1 liter) capacity under oil filter housing (1).
NOTE
Dispose of engine oil in accordance with Standard Operating Procedures.
2.
Remove drain plug (2) from oil filter housing (1) and drain oil.
3.
Remove bolt (3) and oil filter housing (1) with oil filter element (4) from filter head (5).
4.
Remove nut (6) and oil filter element (4) from bolt (3).
5.
Remove oil filter element (4) and gasket (7) from oil filter housing (1). Discard element and gasket.
6.
Remove packing retainer (8), spacer (9), preformed packing (10), and spring (11) from bolt (3). Discard preformed
packing.
7.
Remove bolt (3) and gasket (12) from oil filter housing (1). Discard gasket.
0144 00-2
