TM 9-2350-247-20-1
REMOVE/INSTALL POWER PLANT (M548A1) — Continued
0130 00
15. If carrier is equipped with engine coolant heater kit, connect coolant hoses.
a.
Connect pump-to-engine outlet hose (9) to nipple (10) at engine outlet shutoff valve (11).
b.
Connect heater-to-engine coolant hose (12) to nipple (13) at engine coolant heater (14).
16. Install transmission-to-differential propeller shaft (WP 0332 00).
17. Install winch power takeoff control cable to winch power takeoff (WP 0414 00).
18. Adjust winch control cable (WP 0414 00).
19. Connect winch propeller shaft to winch power takeoff.
a.
Install four lock washers (1) and nuts (2) to secure two U-bolts (3) and universal joint (4) to power takeoff yoke (5).
Tighten nuts to 169-200 lb-in (19-23 N•m) torque.
b.
Install propeller shaft (6) and universal joint (4) on power takeoff yoke (5) on power takeoff (7).
c.
If needed, tighten setscrew (8) to secure power takeoff yoke (5) to power takeoff (7).
0130 00-20
