TM 9-2350-247-20-1
REMOVE/INSTALL POWER PLANT (M548A1) — Continued
0130 00
FOLLOW-THROUGH STEPS
1.
Install transverse beam (WP 0384 00).
2.
Install cab floor plates, door, and seat support (WP 0394 00).
3.
Install cab personnel seats (WP 0398 00).
4.
Connect air pump hose at pump (WP 0191 00).
5.
Connect air cleaner indicator hose to engine air intake (WP 0153 00).
6.
Install air cleaner container and element (WP 0152 00).
7.
Install hull bottom access cover (WP 0383 00).
8.
Lower center seat (see your -10).
9.
Install power plant rear access door (see your -10).
10. Install bulkhead protector, if equipped with material handling kit (WP 0487 00).
11. Install top access cover and grilles (WP 0390 00)
12. Install fabric and/or fiberglass cab covers and frame (WP 0418 00) or (WP 0456 00).
13. Install machine gun mount kit, if required (WP 0513 00), (WP 0514 00), or (WP 0515 00).
14. Connect neutral safety switch (WP 0308 00).
15. Test neutral safety switch and adjust if necessary (WP 0308 00).
16. Connect battery negative lead (WP 0292 00).
17. Road test carrier (WP 0128 00).
END OF TASK
0130 00-24
