TM 9-2350-287-20-1
8-6. TRANSMISSION OUTPUT FLANGE REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
TooIs/Test Equipment:
• General mechanic’s tool kit (Item 24,
Appendix 1)
• Socket wrench, 1-inch, 3/4-inch drive
(Item 58, Appendix 1)
• Torque wrench, 0-600 ft-lb, 3/4-inch drive
(Item 70, Appendix 1)
Materials/Parts:
l Self-locking bolt (Item 303, Appendix H)
Equipment Conditions:
• Vehicle parked on level ground
(refer to TM 9-2350-287-10).
• Universal joint removed (para 9-3).
• Tracks blocked (refer to
TM 9-2350-287-10).
a.
REMOVAL
NOTE
There are two transmission output flanges, which are replaced the same way.
1.
Remove screw (4) and plate (3) from transmission output flange (2).
2.
Remove output flange (2) from transmission (1).
b.
INSTALLATION
1.
Aline splines on output flange (2) and transmission (1), and install output flange (2) on transmission (1).
2.
install plate (3) and screw (4) on output flange (2). Torque screw between 299 and 330 ft-lb (405 and 447 N•m).
FOLLOW-ON MAINTENANCE:
• Install universal joint (para 9-3).
8-25
