TM 9-2350-287-20-1
8-5. TRANSMISSION, TRANSFER, AND DRIVE CONTROL ASSEMBLIES, OIL FILTER
AND OIL COOLER HOSES REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
• General mechanic’s tool kit (Item 24,
• Vehicle parked on level ground (refer to
Appendix 1)
TM 9-2350-287-10).
• Transmission oil temperature transmitter removed
Materials/Parts:
(para 7-39).
• Cap and plug set (Item 13, Appendix D)
•Transmission oil pressure transmitter removed
• LockWasher (8) (Item 178, Appendix H)
(para 7-40).
• Preformed packing (2) (Item 229, Appendix H)
• PowerPack removed (para 3-2).
• Bypass thermostat housing removed (para 6-12).
a.
REMOVAL CAUTION
1.
2.
3.
4.
5.
To prevent contamination
of oil, lines and ports must
be capped immediately after
disconnection.
Disconnect oil filter hose assembly
(1) from elbow (2) on transmission
(7).
Remove screw (3) and clamp (4)
from oil filter hose assembly (5).
Remove four nuts (13), lock-
washers (12), and screws (8), two
split flanges (9), packing (10), and
oil filter hose assembly (1) from oil
cooler (11 ). Discard packing.
Remove four nuts (16), lock-
washers (15), and screws (14),
two split flanges (18), packing (17),
and oil filter hose assembly (5)
from oil cooler (11). Discard
packing.
Disconnect oil fitter hose assembly
(4) from manifold (6).
8-23
