TM 9-2350-287-20-1
7-58. DRIVER’S BULKHEAD TO BATTERIES AND SHUNT LEAD ASSEMBLY (12353402)
REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
General mechanic’s tool kit (Item 24,
l Driver’s hatch opened and secured (refer to
Appendix I)
TM 9-2350-287-10).
l Battery ground cables disconnected
Materials/Parts:
(para 7-41).
l LockWasher (4) (Item 173, Appendix H)
Personnel Required: Two
a.
REMOVAL
NOTE
Several leads are connected to
the battery terminals. After
removing the necessary lead,
loosely secure the others to the
terminal.
1.
Remove nut (6), screw (7), and lead 49 (4) from positive
battery terminal (5).
2.
Remove nut (1), screw (3), and lead 50(1 4) from negative
battery terminal (2).
3.
Disconnect connector (12) from driver’s bulkhead to
batteries and shunt lead assembly (13) inside driver's
compartment.
4.
With the aid of an assistant, remove four nuts (10),
Iockwashers (9), washers (8), and screws (11 ) and lead
assembly (13) from vehicle.
7-183
