TM 9-2350-287-20-1
7-44.
ENGINE DISCONNECT BRACKET TO BULKHEAD WIRING HARNESS (12268418-1) REPLACEMENT
(continued).
13.
Disconnect electrical connector (51) from engine
disconnect bracket (50).
14.
Remove engine disconnect bracket to bulkhead
wiring harness 12268418-1 (52) from vehicle.
[Text Deleted]
b.
INSTALLATION
1.
Install wiring harness 12268418-1 (52) in vehicle.
2.
Connect electrical connector (51) to engine disconnect bracket (50).
3.
Install strap (40) on mount (33) with screw (42), washer (41), new lockwasher (38), and nut (39).
4.
Install ground strap (48) and ground wire (49) on mount (33) with screw (37), washer (44), new lockwasher (45),
and nut (46).
5.
Connect electrical connector (43) to starter relay (47).
6.
Install STE/ICE ground wire (35), wire No. 8 (32), and ground strap (34) on mount (33) with screw (30), new
lockwasher (31), and washer (36).
Change 1 7-133
