TM 9-2350-287-20-1
7-44.
ENGINE DISCONNECT BRACKET TO BULKHEAD WIRING HARNESS (12268418-1) REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Tools/Test Equipment:
Personnel Required: Two
General mechanic's tool kit (Item 24,
Appendix I).
Equipment Conditions:
Vehicle parked on level ground (refer to
Materials/Part:
TM 9-2350-287-10).
Tape, insulation, electrical (Item 67, Appendix D)
Transmission access doors opened (refer to
Lockwasher (Item 129, Appendix H)
TM 9-2350-287-10).
Lockwasher (Item 131, Appendix H)
MASTER switch set to OFF (refer to
Lockwasher (4) (Item 172, Appendix H)
TM 9-2350-287-10).
Lockwasher (4) (Item 173, Appendix H)
Battery ground cables disconnected
Lockwasher (3) (Item 174, Appendix H)
(para 7-41).
a.
REMOVAL
WARNING
Wear eye protection and remove all jewelry, dogtags, and metal items before
performing task. Failure to follow these instructions may result in injury or death
to personnel.
1.
Remove two screws (1) and nuts (3) and disconnect two connectors (2) from two batteries (4).
Change 1 7-129
