ENGINE DISCONNECT BRACKET TO BULKHEAD WIRING HARNESS (12268418-1) REPLACEMENT (continued)

ENGINE DISCONNECT BRACKET TO BULKHEAD WIRING HARNESS (12268418-1) REPLACEMENT (continued) - TM-9-2350-287-20-1_828

ENGINE DISCONNECT BRACKET TO BULKHEAD WIRING HARNESS (12268418-1) REPLACEMENT (continued) - TM-9-2350-287-20-1_830

TM-9-2350-287-20-1 Carrier Ammunition Tracked M992A21 (2350-01-352-3021) EIC:AE6 Manual
Page Navigation
801

TM 9-2350-287-20-1 7-44. ENGINE DISCONNECT BRACKET TO BULKHEAD WIRING HARNESS (12268418-1) REPLACEMENT (continued). NOTE Straps may hold more than one harness lead. Remove only that lead which applies to task and loosely secure remaining leads in place. 5. Remove screw (9), washer (8), lockwasher (7), strap (15), and lead No. 140 and harness (16) from bulkhead. Discard lockwasher. 6. Remove screw (22), washer (24), lockwasher (23), strap (25), and harness (16) from bulkhead. Discard lockwasher. 7. Disconnect electrical connector (27) from master relay (26). 8. Disconnect electrical connector (29) from voltage regulator (28). Change 1 7-131

Privacy Statement
Press Release
Contact