6-3. SURGE TANK REPLACEMENT (continued).
3.
Apply sealing compound to plug (10), and install plug (10) in surge tank (21).
4.
Apply sealing compound to threads of adapter (14) and elbow (15), and install adapter (14) and elbow (15)
in surge tank (21).
5.
Apply sealing compound to threads of four elbows (4, 7, 13, and 18), and install four elbows (4, 7, 13, and 18)
in surge tank (21).
6.
Connect two hoses (8 and 11) to two elbows (7 and 13), and tighten two nuts ( 9 and 12).
7.
Apply adhesive to two hoses (6 and 20), install two hoses (6 and 20) on two elbows (4 and 18), and tighten
two clamps (5 and 19).
8.
Apply adhesive to hose (17), install hose (17) on elbow (15), and tighten clamp (16).
9.
Install retainer (1) and two screws (3) and washers (2) on bulkhead.
FOLLOW-ON MAINTENANCE:
Reposition oil filters and filter adapter (para 3-8).
Fill cooling system (refer to TM 9-2350-287-10).
Install primary fuel filter assembly lifting bracket (para 4-18).
Install primary fuel filter assembly (para 4-25).
Close left and right transmission access doors (refer to TM 9-2350-287-10).
TM 9-2350-287-20-1
6-6
