TM 9-2350-287-20-14-24.HEAT SHIELD REPAIR (continued).CAUTIONThreads of all screws must be coated with sealing compound when self-lockingnuts are not used. Failure to do so can result in damage to equipment.1.Secure bracket (12) to section support (13) with washer (11), screw (10), and new self-locking nut (14).2.Install heat shield (1) in vehicle.3.Install screw (9) and washer (8) on bracket (7)4.Install bracket (12) in vehicle with two washers (15) and screws (16).5.Install 10 screws (3) and washers (2) on heat shield (1).6.Install two brackets (5) on heat shield (1) with two screws (4) and nuts (6).7.Tighten two self-locking nuts (19) on bracket (7) and section support (13).FOLLOW-ON MAINTENANCE:Install powerpack (para 3-2).Install exhaust duct (para 5-2).Change 1 4-71
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
