TM 9-2350-287-20-1,2-19. TROUBLESHOOTING CHART (continued).o. PERSONNEL VENTILATION BLOWER (continued).(4) PERSONNEL VENTILATION BLOWER OPER-ATES, BUT DOES NOT COME ON AUTOMATI-CALLY IN EXHAUST MODE DURING AFESTEST (continued).CONTINUED FROM BIIIs continuity indicated?IReplace wiring harness 12351461 (para 7-79). Verify problem is solved.C. 1. Connect wiring harness 12351461 toAFES wiring harness 12352316 bracket-mounted connector.2. Place red lead of multimeter to pin 1 ofAFES control relay #1 (middle) and blacklead of multimeter to ground.3. Turn MASTER switch ON (refer to TM 9-2350-287-10).4. Perform AFES crew fire detection test(refer to TM 9-2350-287-10).5. Check multimeter after actuating MANUALDISCHARGE switch for 24 ± 3 vdc.6. Turn MASTER switch OFF (refer to TM 9-2350-287-10).Is voltage present?Repair wire 159 or replace harness 12351461(para 7-79). Verify problem is solved.Replace AFES control relay #3 (top) (para21-11). Verify problem is solved.END OF TASK2-264
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business