TM 9-2350-287-20-1
2-19. TROUBLESHOOTING CHART (continued).
d. ENGINE - ELECTRICAL SYSTEM (continued).
(3) ENGINE CRANKS, BUT WILL NOT START
(continued).
CONTINUED FROM H
1. 1. Reconnect wire 10 of wire assembly
12353646 to Y connector.
2. Disconnect wire 10E of harness 12376405
from Y connector.
3. Place muitimeter red lead in wire 10E and
ground black lead.
4. Turn MASTER switch ON (refer to TM 9-
2350-287-10) and check for voltage (24 ± 3
vdc).
5. Turn MASTER switch OFF (refer to TM 9-
2350-287-10).
Is voltage present?
Repair or replace Y connector (para
7-47). Verify problem is solved.
J. 1. Reconnect lead assembly 12353646 to in-
tank fuel pumps and generator system relay.
2. Disconnect wire 76 of harness 12268308
from air cleaner and generator system relay
oil pressure actuated switch.
WIRE1OE
Y CONNECTOR
Continued to next page
2-67
Repair wire 10 or replace harness
12353646 (para 7-62). Verify problem
is solved.
CONTINUED TO STEP M
CONTINUED FROM STEP G
