2-19. TROUBLESHOOTING CHART (continued).
d. ENGINE, ELECTRICAL SYSTEM (continued).
(1) ENGINE DOES NOT CRANK. All other electrical
systems operate (continued).
CONTINUED FROM N
N. 3. Connect one lead on pin P of harness
12268308 engine disconnect bracket con-
nector and connect other lead on wire 14B
engine starter terminal connector and check
for continuity.
Is continuity indicated?
o.
WARNING
Wires 5A and 6A of harness
12353072 carry live voltage from
the batteries. Handle these wires
with caution to avoid injury to
personnel or damage to vehicle.
1. Disconnect harness 12353072 from en-
gine disconnect bracket.
2. Disconnect wires 6A and 5A from engine
starter.
3. Check continuity of wires 6A and 5A.
Is continuity indicated in both wires?
Replace starter motor (para 7-5).
Verify problem is solved.
i
1
b
Repair 5A and/or 6A or replace
defective wire harness 12353072
(para 7-52). Verify problem is
solved.
END OF TASK
2-60
WIRE 14B
WIRE 6A
STARTER
SOLENOID
TM 9-2350-287-20-1
repair wire 14B or replace
harness 1226830b (para 7-50).
Verify problem is solved.
