SLAVE STARTING DISABLED VEHICLE USING MAIN ENGINE

STARTING THE APU IN EXTREMELY COLD WEATHER (continued) - TM-9-2350-287-10_266

SLAVE STARTING DISABLED VEHICLE USING MAIN ENGINE (continued) - TM-9-2350-287-10_268

TM-9-2350-287-10 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
244

TM 9-2350-287-10 SLAVE STARTING DISABLED VEHICLE USING MAIN ENGINE Before trying to slave start a disabled vehicle, take these preliminary actions: • Check batteries for damage. Notify Unit maintenance if batteries are damaged. • Check electrolyte level (TM 9-6140200-14). Add distilled water as necessary. WARNING • Do not park M992A1 in front of disabled vehicle. Personnel injury or damage to vehicles could occur if vehicle rolls forward. • Do not allow vehicles to touch. Allow enough space between them to permit working room. Shorted circuits could allow electricity to flow through vehicles, causing Injury to personnel and/or damage to equipment NOTE • Use only front slave receptacle to slave start vehicle. • Before applying the service brake while on steep slopes (greater than 20 percent), adjust the driver's seat so you can apply maximum leverage to the brake. 1. Set parking brakes (1) on both vehicles (p 2-84). 2-224

Privacy Statement
Press Release
Contact